Search:

IIRC it doesn't work that way. It's batch fire when it sees the pin. The teeth are for RPM only. You haven't heard that you need to have the motor at TDC when putting the flywheel on have you? It...

Anders, there are just too many odd things about it. First, why go back after questions were raised and modify the dyno print out so at the top where it says "flywheel horsepower" cannot be seen...

We were discussing this dyno plot the other day and it clearly said flywheel horsepower and flywheel torque at the top. Now you have gone back and cut the top off so we cannot see it anymore. Whats...

You cut off the top where it shows if it is flywheel or rearwheel HP? Are you sure that is RWHP?

So can it breathe above 7300? Is the porting designed to breathe at that velocity? Can you time the...

Hey Joe thanks for the specs. What does the torque curve look like after 7300RPM? Can it breath up there or does it fall off? Do you have the cams timed for peak power around 7300? What kind of...

Couple of things we want to know:

How the hell do you get 260RWHP at 7300rpm and the engine spins to 9000rpm? I don't want to do the math here in front of everyone, but that is the most powerful...

One thing you have to remember (not to defend Dinan) is that THEY carry the warranty on your new BMW when you buy parts that void BMW's warranty. That has a serious overhead cost.

I actually have...

I used two (2) 3"x20" glass pack resonators turned around backwards on mine. It worked very well. Killed the drone too. They were offset about half and half to each other if I remember correctly.

T

Wait for the new 4cyl twin turbo. That will be the hot swap.

T

All true but what if you are classed by that dyno reading? Then what?

T

Can you see if one of the mods will update the first post with all the newest information? Anyone coming to this thread to get updated information can't without several hours of reading through it.
...

Can we get a consolidated update on where everything is at this point? I started reading and after page 5 I quit. Where do things stand at this point?

T

Kinda like the OEM E30 M3 wheel center caps with a fake nut.........[peace]

I would rather form follow function myself.

T

Owned and lived with everyday or driven? There is a huge difference. You cannot use test drives with driving daily in all situations.



And how many BMW's that you have owned can you compare...

Ted, how many ///M cars have you owned and driven regularly? Why is everything compared to an Evo or Subi? Is that all you have experience with?

Go get an Evo, then a Subi, then a BMW 3 series...

Beauty is in the eye of the beholder............

If you don't have something nice to say, then don't say it...........

To each their own........

When this car becomes avail to the general...

Whoa, is that a slip of the keyboard, or did you get some insider info at the bar in Germany?

T:gotcha:

1) It is the raw footage that cinematographers use put together commercials.
2) Again it is more raw footage that they can use and modify for more marketing commercials and short spots.

Guys,...

plenum used good $75
alternator used good needs pulley $75

I have these items for sale plus shipping from 29681:

stock header with O2 used good $75
stock radiator used good $100
stock electric fan original resistor used good $100
oil pan baffle from...

yeah the picture is deceiving, do you have a pic from the drivers side?

T

http://heersink.org/bruce/M3/project/firewall%20inside%203.jpg

Isn't that a little dangerous on the drivers side during a crash?

Same thing happened to me guys with Gustave's "lot". I sent him a reply and said "I'll take it, all we need to do is work out the shipping details." He later came back and said that someone local is...

I sold a gutted rolling chassis last year that had all matching vins and all original glass. It also had a Dinan plaque on the center console since it was the chassis used for the 2.6l motor R&D. Not...

The 340hp number is wrong. there were 375hp works rally cars

T

How good did it handle with the S50B32 in it? Looks like you have a lot of rubber up front. Does the level of torque that these S50/S54's have change the characteristic of the E30M3 chassis much? How...

Sold my rolling chassis last year and it was gutted......no interior AT ALL!

9K

T

I did attempt to rebuild the Dinan 2.6L.......:shit:

Guinea pig......money ran out.

I doubt very seriously that it is John's design and product that he is marketing. It is someone else that...

I'll take an E46 ///M chassis with an S65 please. How much?:peekaboo:

T

Love everything about it except the stretched tires on the wheels. Just doesn't do it for me. Nagaro 16" baskets would finish it off for me. Love it Joe, great job.

T

Do you have anything for the S65 yet?

T

Or engine dyno. we wont be picky.

T

That is a crazy deal. I bought a Motec/harness/map for more than double that and had to convert throttle and lock the vanos. An E46 sedan with an S54 power plant is looking more and more likely for a...

I dont know. My 330zhp is 3200lbs factory loaded. So make it a race chassis around 26-2800 lbs with a proper 300hp S14 would be sweet.

T

I think its the relative relationship between the size of the pulse's wavelength and the radiused edge. I would think that the pulses at 5000rpm would be relatively close to a primary resonant freq...