E30 M3 Race Chassis For Sale
Clean title . . but colorful history . .
1988 E30 M3 chassis roller,
Built from two E30 Chassis cut and seam welded on factory seams. Rear section is from M3 and forward section is from E30 325i. Neither end has been previously damaged.
Sunroof removed and welded shut properly and sealed. Entire catridge removed along with sunroof inner skin.
E30 M3 rear window in place, original, never broken
E30 M3 right side door
Left door is from 325i
E30 M3 rear bumper assembly, complete
E30 M3 trunklid
E30 stock hood
Right front M3 fender
E30 M3 windshield
E30 M3 side quarter windows
Steering column, E30
E30 M3 dash with matching serial number
E30 M3 cowl with matching serial number
23 mm M3 brake master cylinder
Rear light assemblies
Side skirts included.
Front M3 bumper brackets
Rear and front subframes are correct, but suspension is 4 lug as I donít presently have an extra E30 M3 5 lug set up.
Chassis has complete E30 M3 wiring harness.
I can provide this chassis with a full cage built to SCCA, NASA, BMW Club Racing, or FIA rules for any class. 1.75 OD x .095 DOM tube, or lighter depending on class and final weight.
This chassis is presently being built by a body shop professional with 35 years experience. All joints to join the sections are seam welded at original factory joints. Then blasted before being finished in self-etching primer. Seam sealing can be done, but if used for MOD then we would eliminate it. Rest assured it will be perfectly straight!
Please inquire directly, Mario@VSR1.com