S14 2.0 hill climb project

[TR-Spider]

I would say black.
However, with your white car the red may work as well...

Thanks for the information on the gearbox, if only they would do a version with syncros...

Thomas

[Jarek S4]

Now I am working on pedals. I decided to use separate bake pump for front and rear. I will use mechanism that alows to change balance between front and rear. It will help to make braking as good as possible.

[GK-E30M3]

Nice work Jarek

where did you get the Carbon Door Panels - is the guy from Allegro

Chris

[GK-E30M3]

Oczywiście, że mam ale ponieważ to jest forum m3 to trochę się boję je tu wklejać bo dopóki sprawy dotyczą silnika to wszystko jest ok ale boję się, że jak panowie zobaczą zwykłą e30 to mnie zbanują albo wyśmieją. W sumie to nie wiem co zrobić z tym fantem bo chciałbym kontynować ten wątek ale ze wzglądów możliwości częstego rozbijania auta zdecydowałem się na zwykłą budą bo tego nie brakuje w Polsce i tanie.

Na marginesie widzę, że jesteś z Chicago. Skąd dokładnie? Czasem tam bywam (Hanover Park).
Mieszkasz tam długo? Jeździsz czasem na NASCAR do Joliet?

Mieszkam w Homer Glen kolo Joliet
tak wogule to co robisz w Polsce na codzien samochody?

[Jarek S4]

Nice work Jarek

where did you get the Carbon Door Panels - is the guy from Allegro

Chris

Yes this is from guy from allegro. Really good work and also not so expensive.

[Magmotor]

Hi Jarek,

I have a B1420 engine to, and i have to buy new pistons. For now i only would like to buy the pistons and later camshafts. So, you have the original camshaft with wossner pistons? What modifications did you do in your engine?

I'm already in Poland. It will be nice to see your project.

All the best

[Jarek S4]

Hi Jarek,

I have a B1420 engine to, and i have to buy new pistons. For now i only would like to buy the pistons and later camshafts. So, you have the original camshaft with wossner pistons? What modifications did you do in your engine?

I'm already in Poland. It will be nice to see your project.

All the best

I haave Schrick 292/284, head prepared in germany, ITB and trumpets prepared by myself, light flywheel.

[Modena 1]

Where can i find the carbon door panels?

[Magmotor]

Do you have news about the engine build?

[belayboys]

love builds like this great job man

[kalib0y]

very cool build

[Jarek S4]

Where can i find the carbon door panels?

There are some guys making it for special order in Poland. But it is not expensive part so probably shiping cost will be comparable to panel cost so...
It is not real company, just someone with knowledge about CF and FG. You order it, wait aprox. one week and he send it to you.
If interested give me PM